Page 125 - Premdor Range 2018
P. 125

 Available in Standard Core, Semi Solid, Safe ‘N’ Sound and FD30  re door
options, excluding 5 panel smooth which is available in standard core and FD30 only.
Available in Solid core and FD30  re door options.
White Laminate
Available in Solid core and FD30  re door options.
            Ladder
1 panel
Scandanavian two stile
Horizontal 4 line
Sand vertical
Vertical 5 panel
Ebony vertical
Design: 8G
2 panel smooth 2 panel arch 4 panel smooth 4 panel arch
5 panel smooth
6 panel smooth / textured
top textured / textured
top textured
                 Scandanavian horizontal
Wenge vertical
Oak two stile
Walnut two stile
Oak vertical
Ash vertical
Design: 19G
Walnut vertical
Design: 20G
Durador vertical
Design: 21G
Oak vertical 16G glazed clear or wired
Design: 22G
Ash vertical 16G glazed clear or wired
Design: 23G
Innova© ash veneer
Design: 24G
Innova© white oak veneer
Design: 25G
Available in FD30  re doors only.
Design: 1G Design: 3G Design: 7G
Design: 10G Design: 16G Design: 18G
                    Design: 26G Design: 27G Design: 28G Design: 29G
Architrave types
Architraves are supplied unassembled, but cut to length, pre-mitred and machined for ‘butterfly’ joining clips to connect the components together. Final installation on site is completed by gluing the architrave into the pre-machined architrave groove in the door lining using a ‘no nails’ type adhesive.
White re-coatable foil faced finish frame and architrave requiring minimum on site decoration, therefore significantly easier to paint than a traditional primed MDF or timber lining.
Contemporary 58mm & 69mm
Ogee
58mm & 69mm
Torus
58mm & 69mm
All types are 22mm thick
Additional information
Glazed doors
Glazed doors are supplied with glass meeting
the requirements of BS EN 12600. Factory glazed moulded, veneer and veneer match FD30 fire doors are available with either clear or wired glass.
Pairs
Pairs of doors are supplied with square, unrebated meeting stiles. For ease of handling, these doorsets are delivered unassembled, apart from horizontal 4 line moulded and veneer match options which are not available.
Sound reduction option (44mm)
Sets with improved acoustic performance for use within domestic dwellings are available. These doorsets can be used where a 29dB sound reduction is required. Applies to single leaf doorsets only. Please contact Premdor for further details.
Accessory pack
All SpeedSet Plus doorsets are supplied with a pack containing all required fixing components, brackets, architrave joint clips, and screws.
N.B - Images are for illustration purposes only.
  Options can be ordered on all doors where suitable. • Factory priming and edge banding optional.
• Non standard sizes.
• Factory glazing.
• Supply and  t intumescent seals to  re doors. Please see page 176 for further information.
                          for distributor & technical information | 0844 209 0008 | www.premdor.co.uk 125

































   123   124   125   126   127